SA-ADP

$1,000.00 each

discontinued

Add to compare

7-driver, 3-way in-wall surround / rear, Ultra-Rigid die-cast chassis / mounting bracket (optimized reverberant soundfield)

SPECIFICATIONS

DESIGN	7-driver, 3-way in-wall surround / rear, Ultra-Rigid™ die-cast chassis / mounting bracket (optimized reverberant soundfield)
CROSSOVER	3rd-order electro-acoustic at 2.5 kHz; 2nd-order electro-acoustic at 550 Hz
HIGH FREQUENCY DRIVER	Two 25-mm (1 in) P-Be™ domes, rear damping chamber with ARB™ fins and integrated heatsink, dual super-neodymium magnets, die-cast heatsink chassis
FREQUENCY RESPONSE ^ON-AXIS	±2dB from 48 Hz - 45 kHz
FREQUENCY RESPONSE ^{30° OFF-AXIS}	(reverberant soundfield)
MIDRANGE FREQUENCY DRIVER	Four 29-mm (1-1/8 in) x 102-mm (4 in) Co-PAL™ cones, 14-mm (9/16 in) four-layer voice-coils, dual super-neodymium magnets, AVS™ die-cast heatsink chassis, IMS/SHOCK-MOUNT™
LOW FREQUENCY DRIVER	210-mm (8 in) mineral-filled polypropylene cone, 38-mm (1-1/2 in) four-layer voice-coil, massive ceramic / ferrite magnet, AVS™ die-cast heatsink chassis, IMS/SHOCK-MOUNT™
SENSITIVITY ROOM / ANECHOIC	90 dB / 86 dB
LOW FREQUENCY EXTENSION	38 Hz (DIN)
SUITABLE AMPLIFIER POWER RANGE	15 - 180 watts
MAXIMUM INPUT POWER	120 watts
IMPEDANCE	Compatible with 8 ohms
OVERALL DIMENSIONS	20.0625" (51.0cm) Height 9.0625" (23.0cm) Width " (0.0cm) Depth
CUT-OUT DIMENSIONS	19.125" (48.6cm) Height 8.1875" (20.8cm) Width
MINIMUM INTERNAL VOLUME REQUIRED	0.70 cu ft (20 L)
MINIMUM MOUNTING DEPTH ^{(DEPTH REQUIRED IS THE DISTANCE BETWEEN 1/2" DRYWALL, OR SIMILAR MATERIAL.)}	3" (7.6cm)
WEIGHT	12.3 lbs. (5.6 kg)
FINISHES	White, paintable

Specifications are subject to change without notice.

DOWNLOADS

Share your thoughts with other customers.

Please, Sign in or Sign up to add comments.