SA-35
3-driver, 2-1/2-way in-wall / in-ceiling, die-cast chassis / mounting bracket
SPECIFICATIONS
| DESIGN | 3-driver, 2-1/2-way in-wall / in-ceiling, die-cast chassis / mounting bracket |
| FREQUENCY RESPONSE ON-AXIS | ±2 dB from 46 Hz - 22 kHz |
| HIGH FREQUENCY DRIVER | 25-mm (1 in) G-PAL™ dome, die-cast heatsink faceplate |
| MID/BASS FREQUENCY DRIVER | 210-mm (8 in) S-PAL™ cone, 38-mm (1-1/2 in) voice-coil, die-cast chassis |
| LOW FREQUENCY EXTENSION | 34 Hz (DIN) |
| SENSITIVITY ROOM / ANECHOIC | 96 dB / 92 dB |
| IMPEDANCE | Compatible with 8 ohms |
| FINISHES | White, paintable |
| WEIGHT | 15.6 lbs. (7.1 kg) |
| LOW FREQUENCY DRIVER | 210-mm (8 in) mineral-filled polypropylene cone, 38-mm (1-1/2 in) voice-coil, die-cast chassis |
| CROSSOVER | 3rd-order electro-acoustic at 2.0 kHz; 2nd-order electro-acoustic at 500 Hz (lower bass driver) |
| FREQUENCY RESPONSE 30° OFF-AXIS | ±2 dB from 46 Hz - 20 kHz |
| SUITABLE AMPLIFIER POWER RANGE | 15 - 250 watts |
| MAXIMUM INPUT POWER | 180 watts |
| OVERALL DIMENSIONS | 20.0625" (51.0cm) Height 9.0625" (23.0cm) Width " (0.0cm) Depth |
| CUT-OUT DIMENSIONS | 19.125" (48.6cm) Height 8.1875" (20.8cm) Width |
| MINIMUM INTERNAL VOLUME REQUIRED | 1.4 cu ft (40 L) |
| MINIMUM MOUNTING DEPTH (DEPTH REQUIRED IS THE DISTANCE BETWEEN 1/2" DRYWALL, OR SIMILAR MATERIAL.) | 3" (7.6cm) |
Specifications are subject to change without notice.
DOWNLOADS
| DESIGNER SERIES DATASHEET |
|
1.69M |
| DESIGNER SERIES MANUAL |
|
764.69k |
| SA-35 DIMENSIONAL DRAWING |
|
139.27k |
Please, Sign in or Sign up to add comments.