SA-30

$1,240.00 each

discontinued

Add to compare

2-driver, 2-way in-wall / in-ceiling, die-cast chassis / mounting bracket

SPECIFICATIONS

DESIGN	2-driver, 2-way in-wall / in-ceiling, die-cast chassis / mounting bracket
CROSSOVER	3rd-order electro-acoustic at 2.0 kHz
HIGH FREQUENCY DRIVER	25-mm (1 in) G-PAL™ dome, die-cast heatsink faceplate
FREQUENCY RESPONSE ^ON-AXIS	±2 dB from 48 Hz - 22 kHz
FREQUENCY RESPONSE ^{30° OFF-AXIS}	±2 dB from 48 Hz - 20 kHz
MID/BASS FREQUENCY DRIVER	210-mm (8 in) S-PAL™ cone, 38-mm (1-1/2 in) voice-coil, die-cast chassis
SENSITIVITY ROOM / ANECHOIC	93 dB / 89 dB
LOW FREQUENCY EXTENSION	35 Hz (DIN)
SUITABLE AMPLIFIER POWER RANGE	15 - 180 watts
MAXIMUM INPUT POWER	120 watts
IMPEDANCE	Compatible with 8 ohms
OVERALL DIMENSIONS	12.5625" (31.9cm) Height 9.125" (23.2cm) Width " (0.0cm) Depth
CUT-OUT DIMENSIONS	11.5" (29.2cm) Height 8.0625" (20.5cm) Width
MINIMUM INTERNAL VOLUME REQUIRED	0.70 cu ft (20 L)
MINIMUM MOUNTING DEPTH ^{(DEPTH REQUIRED IS THE DISTANCE BETWEEN 1/2" DRYWALL, OR SIMILAR MATERIAL.)}	2.9375" (7.5cm)
WEIGHT	8.4 lbs. (3.8 kg)
FINISHES	White, paintable

Specifications are subject to change without notice.

DOWNLOADS

Share your thoughts with other customers.

Please, Sign in or Sign up to add comments.