AMS-LCR

$670.00 each

discontinued

Add to compare

5-driver, 2-1/2-way in-wall left / center / right, die-cast chassis / mounting bracket

SPECIFICATIONS

DESIGN	5-driver, 2-1/2-way in-wall left / center / right, die-cast chassis / mounting bracket
CROSSOVER	2nd-order electro-acoustic at 2.0 kHz; 2nd-order electro-acoustic at 700 kHz (outside bass drivers)
HIGH FREQUENCY DRIVER	25-mm (1 in) S-PAL™ dome, die-cast heatsink faceplate
FREQUENCY RESPONSE ^ON-AXIS	±2 dB from 105 Hz - 22 kHz
FREQUENCY RESPONSE ^{30° OFF-AXIS}	±2 dB from 105 Hz - 20 kHz
MID/BASS FREQUENCY DRIVER	Two 115-mm (4-1/2 in) mineral-filled polypropylene cones
LOW FREQUENCY DRIVER	Two 115-mm (4-1/2 in) mineral-filled polypropylene cones
SENSITIVITY ROOM / ANECHOIC	91 dB / 87 dB
LOW FREQUENCY EXTENSION	75 Hz (DIN)
SUITABLE AMPLIFIER POWER RANGE	15 - 150 watts
MAXIMUM INPUT POWER	100 watts
IMPEDANCE	Compatible with 8 ohms
OVERALL DIMENSIONS	24.125" (61.3cm) Height 6.0625" (15.4cm) Width " (0.0cm) Depth
CUT-OUT DIMENSIONS	23.125" (58.7cm) Height 5.125" (13.0cm) Width
MINIMUM INTERNAL VOLUME REQUIRED	0.56 cu ft (16 L)
MINIMUM MOUNTING DEPTH ^{(DEPTH REQUIRED IS THE DISTANCE BETWEEN 1/2" DRYWALL, OR SIMILAR MATERIAL.)}	2.625" (6.7cm)
WEIGHT	9.9 lbs. (4.5 kg)
FINISHES	White, paintable

Specifications are subject to change without notice.

DOWNLOADS

Share your thoughts with other customers.

Please, Sign in or Sign up to add comments.