About Us
Seismic™ 10
Design single high-excursion driver, dual passive radiators, built-in Ultra-Class-D™ amplifier
Amplifier: High-Current, Discrete Output 4500 watts Dynamic Peak / 1500 watts RMS Sustained
Amplifier Design Features Auto-On/Off, Trigger-On/Off, soft clipping, thermal protection, electrical shorting protection
Bass Driver(s) 255-mm (10 in) RCR™ mineral-filled co-polymer polypropylene cone
Passive Radiator Dual 229-mm (9 in) balanced plane high-velocity passive radiators
Low-Frequency Extension* 21 Hz (DIN)
Subwoofer Cut-Off Frequency Variable 35 Hz – 150 Hz
Subwoofer Contour Variable 0 to +6 dB at 60 Hz
Sub. / Sat. Phase Alignment Variable 0° – 180°
Line-Level Input RCA (S/E) or Balanced-XLR. From Sub-Out / LFE-Out of receiver / processor or other line-level source
Line-Level Input Sensitivity 100 mV Mono
Line-Level Input Impedance RCA: 25 k ohms; XLR: 20 k ohms;
Internal Volume 19.7 L / 0.69 cu ft
Height, Width, Depth
33.7 cm x 31.5 cm x 31.5 cm
13-1/4 in x 12-3/8 in x 12-3/8 in
Weight (unpacked) 22.2 kg /49 lb each
Finishes Black Ash with Gloss Top