 |
Design |
|
single high-excursion driver, patented built-in Ultra-Class-D™ power isolation amplifier with Power Factor Correction, sealed enclosure, USB port |
|
|
Amplifier: High-Current, Discrete Output |
|
7500 watts Dynamic Peak / 3000 watts RMS Sustained |
|
|
Amplifier Design Features |
|
Auto-On/Off, Trigger-On/Off, soft clipping, thermal protection, electrical shorting protection |
|
|
Subwoofer Bass Driver(s) |
|
76-mm (3 in) 8-layer bifilar voice coil, high-temperature composite former, 37-lb (16.8 kg) triple ceremic / ferrite magnet / motor structure, massive aluminum shorting ring, oversize FEA-optimized elliptical surround, AVS™ die-cast heatsink chassis, 380-mm (15 in) RCR™ mineral-filled co-polymer polypropylene cone, dual spiders |
|
|
Low-Frequency Extension* |
|
9 Hz (DIN) |
|
|
Subwoofer Cut-Off Frequency |
|
Variable 35 Hz - 150 Hz; Bypass option |
|
|
Sub. / Sat. Phase Alignment |
|
Variable 0° - 180° |
|
|
Line-Level Input |
|
RCA (S/E) Left and Right or Sub-Out / LFE or Balanced XLR. From Sub-Out / LFE-Out of Preamp/Processor or other Line-Level Source |
|
|
Line-Level Input Sensitivity |
|
100 mV Mono |
|
|
Line-Level Input Impedance |
|
RCA: 10 k ohms; XLR: 20 k ohms; |
|
|
Internal Volume |
|
65 L / 2.3 cu ft |
|
|
Universal Input Power |
|
SUB 25's Universal Input Power feature allows the subwoofer to operate connected to any line voltage between 108 volts and 265 volts. However, in order to achieve maximum continuous performance we highly recommend connecting to a 240-volt line. (See dealer for additional information.) |
|
|
AC Voltage |
|
120v - 240v50/60 Hz |
|
|
Height, Width, Depth
(height includes feet; width excludes feet) |
|
51.0 cm x 46.0 cm x 55.0 cm
20-1/16 in x 18-1/8 in x 21-5/8 in
|
|
|
Weight (unpacked) |
|
51.7 kg / 114 lb each |
|
|
Finishes |
|
Cherry, Natural Maple, Piano Black |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Due to the incredibly high power and tremendous output the
SUB 25's grille is non-removable. |
|
|
|
|
|
|
About Us
News
Company
