About Us
PW-2200
 
Design Single driver, bass-reflex, high-velocity low-turbulence resistive port, built-in Super-ClassD™ amplifier
Amplifier: High-Current, Discrete Output 1500 watts Dynamic Peak / 500 watts RMS Sustained
Amplifier Design Features Auto-On/Off, soft clipping
Bass Driver(s) 305-mm (12 in) RCR™ mineral-filled co-polymer polypropylene cone, 51-mm (2 in) bifilar 2+2-layer voice coil, dual spiders, AVS™ die-cast heatsink chassis
Low-Frequency Extension* 18 Hz (DIN)
Subwoofer Cut-Off Frequency Variable 50 Hz - 150 Hz
Sub. / Sat. Phase Alignment Variable 0° - 180°
Line-Level Input From Sub-Out / LFE-Out of receiver / processor or other line-level source
Line-Level Input Impedance 15 k ohms
Line-Level High-Pass Output Roll-Off 3rd-order 18 dB / octave at 80 Hz
Internal Volume 79.5 L / 2.81 cu ft
Height, Width, Depth
(Height includes feet)
49.5 cm x 41.9 cm x 57.8 cm
19-1/2 in x 16-1/2 in x 22-3/4 in
Weight (unpacked) 31.3 kg /69 lb each
Finishes Light Cherry, Rosenut, Black Ash
 
Specifications