About Us
PW-2100
 
Design Single driver, bass-reflex, high-velocity low-turbulence resistive port, built-in Super-ClassD™ amplifier
Amplifier: High-Current, Discrete Output 1500 watts Dynamic Peak / 500 watts RMS Sustained
Amplifier Design Features Auto-On/Off, soft clipping
Bass Driver(s) 255-mm (10 in) RCR™ mineral-filled co-polymer polypropylene cone, 38-mm (1-1/2 in) 4-layer voice coil, dual spiders, AVS™ die-cast heatsink chassis
Low-Frequency Extension* 23 Hz (DIN)
Subwoofer Cut-Off Frequency Variable 50 Hz - 150 Hz
Sub. / Sat. Phase Alignment Variable 0° - 180°
Line-Level Input From Sub-Out / LFE-Out of receiver / processor or other line-level source
Line-Level Input Impedance 15 k ohms
Line-Level High-Pass Output Roll-Off 3rd-order 18 dB / octave at 80 Hz
Internal Volume 42.8 L / 1.51 cu ft
Height, Width, Depth
(Height includes feet)
38.1 cm x 34.9 cm x 51.0 cm
15 in x 13-3/4 in x 20-1/16 in
Weight (unpacked) 19.1 kg /42 lb each
Finishes Light Cherry, Rosenut, Black Ash
 
Specifications